Equalizers
  • GS12241
  • 12G UHD-SDI Re-timing Adaptive Cable Equalizer
  • GS3241
  • 3G HD-SDI Re-timing Adaptive Cable Equalizer
  • GS3140
  • Low-power, Multi-Rate Adaptive 3G SDI Equalizer
  • GS6042
  • Long Reach Multi-rate 6G UHD-SDI Adaptive Cable Equalizer
  • GS3441
  • Long Reach, Dual Output, Multi-rate 3G Adaptive Cable Equalizer
  • GS3440
  • Long Reach, Multi-rate 3G Adaptive Cable Equalizer
  • GS2994
  • Multi-rate 3G Adaptive Cable Equalizer
  • GS2993
  • Multi-rate 3G, Dual Output, Adaptive Cable Equalizer
Semtech GS12141

Semtech GS12141

12G UHD-SDI Retiming Adaptive Cable Equalizer

Add to Watch List

The GS12141 is a low-power, multi-rate, serial digital retiming cable equalizer supporting 12G UHD-SDI. It is designed to equalize and restore signals received over 75ohm coaxial cable, automatically recover the embedded clock from the digital video signal and re-time the incoming data.
 

Watch an overview video of the 12G UHD-SDI Solutions

Features


  • Multi-standard operation from 1Mb/s to 11.88Gb/s
  • Automatic cable equalization:
    • SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant input
  • Support for DVB-ASI at 270Mb/s and MADI at 125Mb/s
  • Performance optimized for 11.88Gb/s. Typical equalized cable lengths of Belden 1694A cable:
    • 70m at 12Gb/s
    • 90m at 6Gb/s
    • 180m at 3Gb/s
    • 240m at 1.5Gb/s
    • 300m at 270Mb/s
  • Low power operation: approx. 320mW
  • Automatic power down on loss of signal
  • Automatic cable length detect
  • Single 1.8V power supply operation
  • GSPI serial control and monitoring interface
  • Dual differential output support DC-coupling from
  • 1.2V to 2.5V CML logic
    • Second output can be disabled for power saving
  • Individually selectable output pre-emphasis to
  • compensate for up to 20” FR4 at 11.88Gb/s
  • Cable equalizer bypass
    • Manual bypass mode for low data rates
    • Configurable automatic bypass for low data rates
  • Programmable carrier detect with squelch threshold adjustment
  • On-chip 100ohm differential output data termination
  • Four configurable GPIO pins for control or status monitoring
  • Wide operating temperature range: -40ºC to +85ºC
  • Small 6mm x 4mm 40-pin QFN
  • Pb-free and RoHS-compliant package

Applications


  • Next Generation 3D / 2D HFR HDTV and 2K D-Cinema, UHDTV1 and 4K D-Cinema end-equipment: Cameras, Monitors, Switchers etc.
  • Next Generation 3G, 6G, and 12G UHD-SDI infrastructures designed in support of UHDTV2, UHDTV1, 4K D-Cinema and 3D HFR and HDR production image formats.

Packaging

  • Small 6mm x 4mm 40-pin QFN
  • Pb-free and RoHS-compliant package

Order Codes

  • GS12141-INE3  Min. Quantity: 490  Tray
  • GS12141-INTE3 — Quantity: 250 — Tape and Reel
 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.