SDI Receivers & Transmitters
  • GS1572
  • Multi-Rate Serializer with Cable Driver and ClockCleaner™
  • GS1582
  • Multi-Rate Serializer with Cable Driver, Audio Multiplexer and ClockCleaner™
  • GS1660
  • HD-, SD-SDI and DVB-ASI Receiver Complete with SMPTE Video Processing
  • GS1660A
  • HD-, SD-SDI and DVB-ASI Receiver Complete with SMPTE Video Processing
  • GS1661
  • HD-, SD-SDI and DVB-ASI Receiver with Integrated Adaptive Cable Equalizer
  • GS1661A
  • HD-, SD-SDI and DVB-ASI Receiver with Integrated Adaptive Cable Equalizer
  • GS1662
  • HD-, SD-SDI and DVB-ASI Transmitter Complete with SMPTE Video Processing
  • GS1670
  • HD-, SD-SDI and DVB-ASI Receiver Complete with SMPTE Audio and Video Processing
Semtech GS2962

Semtech GS2962

3Gb/s, HD, SD SDI Transmitter Complete with SMPTE Video Processing

Add to Watch List

The GS2962 is an SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C or DVB-ASI compliant serial digital output signal.

The integrated ClockCleaner™ allows the device to accept parallel clocks with high input jitter, and still provide a SMPTE compliant serial digital output.

The device can operate in four basic user selectable modes: SMPTE mode, DVB-ASI mode, Data-Through mode, or Standby mode.

In SMPTE mode, the GS2962 performs all SMPTE processing features. Both SMPTE 425M Level A and Level B formats are supported with optional conversion from Level A to Level B for 1080p 50/60 4:2:2 10-bit.

In DVB-ASI mode, the device will perform 8b/10b encoding prior to transmission.

In Data-Through mode, all SMPTE and DVB-ASI processing is disabled. The device can be used as a simple parallel to serial converter.

The device can also operate in a lower power Standby mode. In this mode, no signal is generated at the output.

The GS2962 includes a fully SMPTE-compliant cable driver for SMPTE 259M-C, SMPTE 292M and SMPTE 424M interfaces. It features automatic dual slew-rate selection, depending on 3G-, HD- or SD-SDI operational requirements.

Features


  • Integrated low noise VCO and integrated ClockCleanerTM
  • SMPTE video processing including TRS calculation and insertion, line number calculation and insertion, line based CRC calculation and insertion, illegal code re-mapping, SMPTE 352M payload identifier generation and insertion
  • Integrated cable driver
  • Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C and DVB-ASI
  • Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
  • Ancillary data insertion
  • Optional conversion from SMPTE 425M Level A to Level B for 1080p 50/60 4:2:2 10-bit
  • Parallel data bus selectable as either 20-bit or 10-bit
  • GSPI Host Interface
  • 1.2V digital core power supply, 1.2V and 3.3V analog power supplies, and selectable 1.8V or 3.3V I/O power supply
  • -20°C to +85°C operating temperature range
  • Low power operation (370 mW typical, including cable driver)
  • Small 11mm x 11mm 100-ball BGA package
  • Pb-free and ROHS compliant

Applications


  • Cameras
  • Camera Control Units
  • Multiviewers
  • Production Switchers
  • Master Control Switchers
  • VTRs
  • Video Servers
  • Encoders/Decoders
  • Up/Down/Cross Converters
  • Audio Embedders
  • Format Detectors
  • Test and Measurement Equipment

Order Codes

  • GS2962-IBTE3: Lead-Free, RoHS Compliant, Tape and Reel-250 Pieces
  • GS2962-IBE3: Lead-Free, RoHS Compliant, Tray-168 Pieces
 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.