LED Drivers
  • SC668
    • 8 LED Light Management Unit Automatic Dropout Prevention , Ambient Light Sense Input, PWM Dimming, and 4 LDOs
  • SC667
    • 7 LED Light Management Unit Automatic Dropout Prevention, Ambient Light Sense Input, PWM Dimming, and 4 LDOs
  • SC662
    • Backlight Driver for 6 LEDs with SemPulse® Interface
  • SC657
    • Charge Pump LED Driver for 5BL + SemPulse Interface
  • SC653
    • Charge Pump LED Driver for 4BL + 2LDO + SemPulse Interface
  • SC5010H
    • High Efficiency 8-Channel LED Driver with I2C Interface and Phase-Shifted PWM Dimming
  • SC5010
    • High Efficiency 8-Channel LED Driver with I2C Interface and Phase-Shifted PWM Dimming
  • SC4541
    • High Frequency LED Driver with Integrated Schottky and Simple Interconnect
Semtech SC622

Semtech SC622

Charge Pump LED Driver for 400mA Flash + 2LDO + SemWire Interface

The SC622 is a high efficiency charge pump LED driver using Semtech’s proprietary mAhXLife™ technology. Performance is optimized for use in single-cell Li-ion battery applications.

Features


  • Input supply voltage range — 3.0V to 5.5V
  • Charge pump modes — 1x, 1.5x and 2x
  • Flash LED — 400mA max in flash mode, 250mA max continuous for spotlight
  • Two user-configurable 100mA low-noise LDO regulators
  • Charge pump frequency — 250kHz
  • SemWire™ single wire interface — up to 75kbit/s
  • External flash control pin to sync with camera
  • Optional 1s flash time out
  • Automatic sleep mode (LEDs off ) — IQ = 100μA
  • Low shutdown current — 0.1μA (typical)
  • Ultra-thin package — 3mm x 3mm x 0.6mm
  • Fully WEEE and RoHS compliant

Applications


  • Cellular phone flash
  • PDA flash
  • Camera I/O and core power

Packaging

MLPQ-UT-20 (3 X 3 mm)

Order Codes

  • SC622ULTRT: Lead-free, RoHS and WEEE compliant, 3000 pcs. Tape & Reel